MikroTik Firmware

MikroTik routerOS 6 firmware is generally stable. We are currently using 6.49.11 (some run 6.49.12)

Do not use version 7 (not yet supported) or version 6.47/6.48/6.49.2 (occasional hangs)

routerOS 6

Download 6.49.11 OmniTik (mipsbe) here and SXTsq (arm) here

Remember that OmniTiks use the "mipsbe" firmware and SXT's use the "arm" firmware due to different processors.

We have documented issues with 6.47/6.48/6.49.2 so don't use them.

We have many omnitiks running 6.49.11 without any problem.

Note: with some OmniTik in some case it seems the memory get used up and not released. When we encounter such device we add a script that reboot the OmniTik between 2 - 3am when the used memory reached 75%
Connect to your Omni via ssh and copy ~~past~~paste those lines. This will add a script and schedule the script to run every 15m.

Slack discussion here.

routerOS 7

Don't use it yet - it won't work!

This has finally been released but it doesn't work with our configuration yet. We keep testing it as we are eager to deploy the newly added WireGuard. If you are interested in beta-testing the WG setup, post in the #software-firmware channel on Slack.

If you need to downgrade, read the instructions here

Mikrotik devices come in a variety of architectures and form-factors. Fortunately the firmware versioning and built levels are the same across all platforms. The main variant is the architecture, which might be a different chip for each device model.

We currently use the stable version of RouterOS 6 (6.49.11)

Below is a table of the 6.49.6 firmware for Mikrotik devices that are in the mesh:

Model	Architecture	Firmware link
OmniTik 5ac	MIPSBE -6.49.11	Download
SXTsq ac	ARM -6.49.11	Download
hAP ac^2	ARM	Download
CCR Series	TILE	Download
hAP mini	SMIPS	Download
hAP lite	SMIPS	Download

Installing firmware

Alternatively

if your device has Internet access you can use the GUI,
go to System, Package, Check for update, download& install

or ssh in and type /system package update install